Thursday, December 18, 2008

Update on 144 astray

Its been a long time since I've touched this kit. Today finally gathered sufficient resolve to try and complete this by January.

Reconstruct the details again using pla-plate. This is due to the seam line running across the middle which results in details being sanded off when gluing.
From Astray WIP

The parts looks kinda not proportionate, gonna have to correct it.

Filled up the holes and sharpened the end. I gotta say that i'm a sucker for sharp ends.
From Astray WIP

From Astray WIP


Separated the parts for easier painting later.
From Astray WIP


Same for the head,
From Astray WIP


So far this is how the kit looks like
From Astray WIP

From Astray WIP

From Astray WIP

As usual C & C are welcome!!

Saturday, August 9, 2008

Last Photoshoot of the year

I regret to inform everyone that Advance Hazel, GT40 and Zaku III would probably be the last kit for this year or for many years to come. This is because I would be starting my University studies soon, and hence I may not have to time to build any more. I will try to find time to build during my holidays but nothing is guaranteed.

I am very sad that I'll have to stop modelling for a while but on the brighter side it might cure the huge burnout I'm experiencing these months. This blog will stay on, either as a place for me to rant my Uni likfe or for me to post more works whem I've the time to.

So till then, everyone take care and god bless.

-Zero Ice

GT40 Mk.II

After doing this car I've totally gotten hooked on Car modelling!! I've learnt so much about making it shine my watching videos, reading tips on Plamo and ZeroG and through my own experimenting. I've always thought that by uding tamiya's fine compund it would turn up really shiny. Then i realised that wax is required to achieve such a shine.

Here are the pics:















Zaku III Ver.Zero

I've finally completed this for Plamo's WOOB 3. I must say that it was really a rush job the past few weeks, due to studies' admin problem and other commitments. However, I've managed to complete it before school starts. Initially I tried using Digital Camo on the grey areas and paint the small pla plates red. I turned out to be horrible!!! The kit looks like its got Red Spots all over. So in the end i had to do it all over again. This is the final product, not very satisfied since it was a kit to test all the things I've learned and the paint job was done as simple as possible to make it on time. Anyway here it is.











1/144 Advanced Hazel

There is nothing much to elaborate about this build. This kit has already been built for the past 2 years, decided that it was a lousy job i redid it. Basically OOB, clean colour scheme without shading. The decals came from Samuel decal.

There isn't much photos, this is because I didn't haf the time to buy a base for it. Eventually there will be more photos when I've built the base.









Monday, July 14, 2008

WIP: Fujimi GT40 Mk.II

Bought this at Nakamoto's last thursday. Started working on it last friday and here we are. Progress thus far:

This is excatly the same kit as the one in this video
http://www.youtube.com/watch?v=m7z-D9vJRPE (Part1)
http://www.youtube.com/watch?v=pgaY5aDSwys (Part2)
http://www.youtube.com/watch?v=O_QoaRyCfS4 (Part3)
http://www.youtube.com/watch?v=Zhfjt-mhDLY (Part4)
http://www.youtube.com/watch?v=kLnbB2r4tTw (Part5)
http://www.youtube.com/watch?v=ZmAPMlelKJ8 (Part6)

For those who are intersted in viewing more of these videos you can visit the blog below: S.L's blog


Interior:








Exterior: I've used Gaia colour's EX-02 for this kit. Sprayed abt 5 layers left it to dry overnight and then applied the decals. So far no polishing has been done yet.











Thursday, July 3, 2008

An Intersting day at the CC

Yesterday, I went to play basketball at a nearby Community Centre(CC). Since, it was in the afternoon we left our bags at a shady area near the basketball court where we could see them. One of my friend who didn't bring a bag along left his wallet,hand phone and keys on the floor beside our bags. After a while he realised that his wallet was gone! We searched around the area to see if it was misplaced. After a while, we decided that it was stolen, we went to the CC's office to report it. Luckily, the CC installed CCTVs around the place, and luckily enough it managed to capture the footage where the thief bent down and reached his hand through the fence to grab my friend's wallet.

The staff at the CC were very helpful and said that they recognised the thief, since he always came and requested for financial help. They called his house and asked him to come down to the CC to return the wallet or else they will call the cops. When the culprit rushed down to the CC, he still had the cheek to deny that he stolen anything!! He insisted that he was only picking up his own wallet. The seinor manager of the CC was very frim and allowed him to see the evidence we had against him. In the end the culprit had no choice but to admit that he had taken the wallet. However, he said that he took all the money and dropped the wallet into the post box! One thing lead to another and after a few long hours we manged to get the post office personel to come and open the mailbox to retive the wallet. That is not the end of the story, the postoffice informed my friend that he is unable to retrive the wallet immediately. He would have to go to the post office to collect it and pay another 20 dollars to retrive it!!

In the end we decided to allow the culprit to leave and not inform the police about this matter. We also informed the CC not to pursue this matter but to remind the person not to do this kind of stuff again.

A rush to finish Zaku III

Since school is starting in a few months time, I feel that I should finish this kit asap since its gonna be pretty hectic when school opens. These few days I've been trying out tips that I've learnt online from the gurus at Plamo & Zero G. I'm pretty satisfied with the results obtained. I've mainly used pla-plates to detail up the kit and added additional panel-linig on some parts. It is not excatly first class work but I feel that its ok for my first time.

However, I'm still not happy with my photography skills. I'm not sure what am I doing wrong when it comes to taking photos. The photos do not reflect how the kit looks in real life.

Anyway, here are the photos,
This is what I've completed on the Monday(30/06/08). I've managed to complete the detailing of the lower body.











The following photos have been taken today;